GUIDE TO THE TYPES, USE AND INSTALLATION OF BIDETS

Most commonly found in American bathrooms, the bidets are the low oval plumbing fixture intended for washing genital areas. Although these were originally designed with the purpose to clean the private areas of the body, but such fixtures can also be utilize for sitz bath, a bath in which only hips are soaked in water, if you are suffering from hemorrhoids.
If you would like to enjoy the benefits of such vanities, take your precious time on knowing several kinds of bidets available, and its use and installation.
Types:

• Over-the-rim: This model of bidet is fitted with a standard tap. The bowl is filled with water exactly the same way you fill a sink. Moreover, it is least expensive model and easier to install. One best feature of over-the-rim bidet is that rimless bowl is easy to clean.
• Heated rim: This is another kind of plumbing fixture that comes with handles. One handle of the heated rim model is for hot water while another can be used for cold water. This model is also known by the name flushing rim. Not only this, you have options to control the water temperature as per your convenience.
• Spray model (Vertical and Horizontal spray): This is one of the more popular models that come with a spray, which provides a gentle shower. Bidet spray comes with its two models:
  1. Vertical- it consist of a fountain jet situated in the center of the bowl
  2. Horizontal- this model delivers a horizontal stream of water.
  
  One thing you need to know about such vanities is that they involve the risk of water contamination from internal spray fittings. So, before buying such fixture make sure that the back-flow prevention device is also installed in it. Rather, doing it by yourself, take assistance of a professional plumber to install it properly.
• Combination model: It is designed by incorporating the features of both a heated rim and a vertical spray model.

INSTALLATION:

• Select your bidet and attach the drain and faucet fittings to its body.
• Place this fixture to the location where you want to install it.
• Place the contour of the butt cleaner on the floor and draw the location of the bolts on the floor.
• Now, remove the seat and bore holes with the help of the drilling machine and re-position it.
• Insert the bolts and tighten them and also cover them with caps.
• Now, connect cold and hot water supply tubes and drain.
• Connect the water supply and turn on the water to test leakage.

If you are looking for a quality butt cleaners, please log on to http://cleanbutt.com/.